The evolution of coatings, the peculiar features
of binding agents, the variety of wall problems preparatio, find their
proper solution in the undercoats wide range proposed by SAIF. Both undercoats
and protectives coats are formulated, tested and approved following rigorous
methodologies and grant maximum efficiency on solving specific problems. |
 Saifseal
Acryl 300% water based acryl sealer for interior
and exterior walls, can be applied on new plasters. It uniforms the
absorption of next paint coat. SAIFSEAL ACRYL 300% enhance the adhesion
of next coat, maintaining an acceptable vapour transmission rate, and
due to its penetration power, it helps stabilizing the plaster compounds.
|
  Saifseal
Dur consolidante is a transparent water based
sealer suitable for gypsum boards, plasters, deteriorated plasters, old
walls already painted. The binding agent micro molecules penetrate the
surface achieving three effects:
1. Consolidate the surface
2. Uniform the absorption
3. Improve the adhesion of the next paint to be applied
|
  Saifseal
Plyo is a transparent solvent based sealer for
new or old plastered surfaces especially when, due to the wall condition,
a good vapour permeability is required . Deteriorated flaking cement and
lime based plasters can be recovered, due to consolidating action of SAIFSEAL
PLYO . This product improves the protection of the wall maintaining an
acceptable vapour permeability, and improving the adhesion of next coating.
|
 Silika
SEAL is a mono component primer based on potassium
silicate. The chemical reaction with lime and cement based plaster forms
a solid and resistant base for further applications.
SILIKA SEAL has a very good vapour transmission rate, can be applied on
all mineral substrates, cannot be applied on gypsum, wood, sinthetic paints
and coatings.
|
   Xilodecor
is a protective, penetrating solvent based specific
treatment formulated with special silossanic resins compatible with cement
supports, stones and bricks, and granting a good vapour transmission rate.
XILODECOR, even though at high concentration can produce a satin effect
on non absorbent supports, it penetrates in the cement or bricks, producing
a consolidating effects and protecting against rain and other atmospheric
agents.
The peculiarity of XILODECOR, applied according to the instructions, are
its permeability to water vapour and its good water repellent effect.
These two features grant, from one side, protection against agent and
deteriorating phenomena, from the other side the breath ability of the
support. For protection of stones, a special “XILODECOR PIETRA”
is available, granting high protection without changing colour of the
stone.
|
 Waterproofing
is a water based modified styrene acryl resin coatings, producing a very
flexible and elastic film, resistant to water. It can be successfully
applied on floors and roofs to waterproof the surface. Very important:
the concrete surface should have a minimum inclination of 4%, in order
to avoid back water, and without structural cracks. When dried, the coat
can stand: max temperature +40°C / min temperature - 30°C.
|
 No
Dust is a special polyurethan monocomponent
coat formulated to prevent the natural breaking down of cement floors
(industrial floor, garages, etc.). Due its resistance and support adhesion,
NO DUST is perfectly wheel able.
Two types are available: transparent or coloured.
|
Saifseal
Primer is a transparent solved based consolidating
sealer for new and old plasters. Deteriorate cement and lime plasters
can be recovered, thanks to consolidating action of SAIF SEAL PRIMER.
High penetration and good sealing action. Help adhesion of next coat,
keeping an accetable vapour permeability rate.
SAIFSEAL PRIMER can be applied on cement and lime plaster, dry wall, gypsum
boards and fiber cement, provided that they are sound, dry and without
grease stains.
|
   Xiloseal
is a water based sealer for interior and exterior.
The micro size silica based polymers grant highly penetrating capability,
consolidating the treated surface. Even though it is water repellent,
XILOSEAL has a very good vapour diffusion rate, suitable for old buildings
to be restored. XILOSEAL works perfectly on mineral plasters, protecting
and consolidating them.
|
 Beton
Decor is a protecting, penetrating and filming
specific treatment for cement floors and walls, exterior and interior.
Based on solvent acryl binders, BETON DECOR protects the surface giving
a good water repellent rate, and a good resistance to atmospheric agents.
Comparated with sealing polyurethan based coats, beton decor, notwithstanding
its film, doesn’t seal completely the surface, keeping a light vapour
transmission ability. Two coats of BETON DECOR intensify the surface colour,
verging on darker tone. Applied on reinforced concrete, BETON DECOR improves
the surface consistency, drastically reducing its deterioration and protects
from rust aggression the inside reinforcing bars.
|
  White
Seal Acryl is a water based sealer based pigmented,
for interiors and exteriors, useful to level the undercoatings besides
consolidating the surfaces. Formulated with special acrylic resins in
dispertion , WHITESEAL ACRYL has also a great penetration in the support,
is vapour permeant and recoatable with any kind of water based paint.
|
Saifseal
Primer is a transparent solved based consolidating
sealer for new and old plasters. Deteriorate cement and lime plasters
can be recovered, thanks to consolidating action of SAIF SEAL PRIMER.
High penetration and good sealing action. Help adhesion of next coat,
keeping an accetable vapour permeability rate.
SAIFSEAL PRIMER can be applied on cement and lime plaster, dry wall, gypsum
boards and fiber cement, provided that they are sound, dry and without
grease stains.
|
Saifseal
Plyo Super is a transparent solvent based sealer
for new or old plastered surfaces especially when, due to the wall condition,
a good vapour permeability is required . Deteriorated flaking cement and
lime based plasters can be recovered, due to consolidating action of SAIFSEAL
PLYO . This product improves the protection of the wall maintaining an
acceptable vapour permeability, and improving the adhesion of next coating.
|
Saifseal
Vynil 300%
No information in english avaiable yet. |
Eterseal
No information in english avaiable yet. |
Metacryl
Seal
No information in english avaiable yet. |
Saifseal
Coat Quartz is a coloured water based undercoat
for interior and exterior. Application of SAIFSEAL COAT QUARTZ is specially
required before thick and coloured coatings application, such as ORION,
TAURUS, VEGA, ARIES, ALPHA, etc… The light pigmentation of SAIFSEAL
COAT QUARTZ helps to uniform the wall to be coated and, due to quartz
filler, facilitate the adhesion and application of trowelled coating.
Beside these features, it uniforms the wall absorption granting a regular
drying time of next coating.
|
All
the colours above are standard production. All colours showed in Tinthosystem
colour card are avaiable under request. Thanks to the Tintometric
system we are able to reproduce virtually any colour from a sample. The
colors above are indicative referred to our real sample catalog avaiable
under request. All logos and trademarks are property of SAIFsrl. |